Surveying Medical Mask Waste Generation in Can Tho University, Vietnam
Abstract
Medical mask waste is generated more and more and causes many negative impacts on the environment and human health. This study was conducted to survey the current status of using and managing medical mask waste by students at Can Tho University, Vietnam. The study conducted by direct interviews with 120 students and field observations of the research area. As a result, students of Can Tho University use about 43,850 masks resulting in 153.475 kg of medical mask waste per day. Medical mask waste was not well classified by students. Understandings of students regarding toxicity and non-biodegradable characteristics of medical masks are relatively high. However, the level of awareness of students about medical mask waste has some limitations, through the way that medical masks are considered as household waste and are not really necessary to pay attention to the classification of medical masks. As can be seen that training on waste classification and associated waste containers are urgently needed for better solid waste management in the university. This research will contribute to enriching scientific data sources in the field of solid waste, especially medical mask waste.
References
Anik, A. H., S. Hossain, M. Alam, M. B. Sultan, M. T. Hasnine, and M. M. Rahman (2021). Microplastics Pollution: A Comprehensive Review on the Sources, Fates, Effects, and Potential Remediation. Environmental Nanotechnology, Monitoring and Management, 16; 100530
Bajer, K. and U. Braun (2014). Different Aspects of the Accelerated Oxidation of Polypropylene at Increased Pressure in an Autoclave with Regard to Temperature, Pretreatment and Exposure Media. Polymer Testing, 37; 102–111
Barnes, D. K., F. Galgani, R. C. Thompson, and M. Barlaz (2009). Accumulation and Fragmentation of Plastic Debris in Global Environments. Philosophical Transactions of the Royal Society B: Biological Sciences, 364(1526); 1985–1998
Chamas, A., H. Moon, J. Zheng, Y. Qiu, T. Tabassum, J. H. Jang, M. Abu-Omar, S. L. Scott, and S. Suh (2020). Degradation Rates of Plastics in the Environment. ACS Sustainable Chemistry and Engineering, 8(9); 3494–3511
Chen, X., X. Chen, Q. Liu, Q. Zhao, X. Xiong, and C. Wu (2021). Used Disposable Face Masks are Significant Sources of Microplastics to Environment. Environmental Pollution, 285; 117485
Chowdhury, H., T. Chowdhury, and S. M. Sait (2021). Estimating Marine Plastic Pollution from COVID-19 Face Masks in Coastal Regions. Marine Pollution Bulletin, 168; 112419
De Souza Machado, A. A., C. W. Lau, W. Kloas, J. Bergmann, J. B. Bachelier, E. Faltin, R. Becker, A. S. Gorlich, and M. C. Rillig (2019). Microplastics Can Change Soil Properties and Affect Plant Performance. Environmental Science and Technology, 53(10); 6044–6052
Dharmaraj, S., V. Ashokkumar, S. Hariharan, A. Manibharathi, P. L. Show, C. T. Chong, and C. Ngamcharussrivichai (2021). The COVID-19 Pandemic Face Mask Waste: A Blooming Threat to the Marine Environment. Chemosphere, 272; 129601
Fadare, O. O. and E. D. Okoffo (2020). Covid-19 Face Masks: A Potential Source of Microplastic Fibers in the Environment. The Science of the Total Environment, 737; 140279
Hai, N. T. and V. T. Thien (2021). Design Equipment to Produce 4-layer Medical Mask Body Using Ultrasonic Welding Technology. Journal of Science and Technology University of Danang, 20(2); 86–90
Hasan, N. A., R. D. Heal, A. Bashar, and M. M. Haque (2021). Face Masks: Protecting the Wearer but Neglecting the Aquatic Environment?-A Perspective from Bangladesh. Environmental Challenges, 4; 100126
Jimoh, J. O., S. Rahmah, S. Mazelan, M. Jalilah, J. B. Olasunkanmi, L.-S. Lim, M. Abd Ghaffar, Y. M. Chang, K. Bhubalan, and H. J. Liew (2023). Impact of Face Mask Microplastics Pollution on the Aquatic Environment and Aquaculture Organisms. Environmental Pollution, 317; 120769
Kleme?s, J. J., Y. Van Fan, and P. Jiang (2020). The Energy and Environmental Footprints of COVID-19 Fighting Measures-PPE, Disinfection, Supply Chains. Energy, 211; 118701
Mattsson, K., S. Jocic, I. Doverbratt, and L.-A. Hansson (2018). Nanoplastics in the Aquatic Environment. Microplastic Contamination in Aquatic Environments; 379–399
Mentari, A. E. and A. Khoironi (2022). The Impact of Disposable Mask Waste Pollution in Peat Soil. IOP Conference Series: Earth and Environmental Science, 1098(1); 012016
National Assembly (2020). Law No. 72/2020/QH14. Law on Environmental Protection
Prime Minister (2020). Directive No. 16/CT-TTg of the Prime Minister: On the Implementation of Urgent Measures to Prevent and Combat COVID-19 Epidemic. Mar
Rozana, K., E. Susanti, I. Saputra, E. Ciptawati, and D. Kurniawan (2021). Microbiome Analysis of Medical Mask Waste as an Early Step to Prevent Environmental Pollution Due to Unstandardized Waste Treatment Strategies. IOP Conference Series: Earth and Environmental Science, 802(1); 012036
Rumon, A. and M. Dorris (2020). Comparative Analysis of Bioplastic and Synthetic Plastic Uses in Textile Industry. Edinburgh Napier University
Sana, S. S., L. K. Dogiparthi, L. Gangadhar, A. Chakravorty, and N. Abhishek (2020). Effects of Microplastics and Nanoplastics on Marine Environment and Human Health. Environmental Science and Pollution Research, 27; 44743–44756
Selvaranjan, K., S. Navaratnam, P. Rajeev, and N. Ravintherakumaran (2021). Environmental Challenges Induced by Extensive Use of Face Masks during COVID-19: A Review and Potential Solutions. Environmental Challenges, 3; 100039
Sharma, S. and S. Chatterjee (2017). Microplastic Pollution, a Threat to Marine Ecosystem and Human Health: A Short Review. Environmental Science and Pollution Research, 24; 21530 21547
Toch´a?cek, J. and Z. Vr´atn´??ckov´a (2014). Polymer Life-time Prediction: The Role of Temperature in UV Accelerated Ageing of Polypropylene and its Copolymers. Polymer Testing, 36; 82–87
Van Doremalen, N., T. Bushmaker, D. H. Morris, M. G. Holbrook, A. Gamble, B. N. Williamson, A. Tamin, J. L. Harcourt, N. J. Thornburg, and S. I. Gerber (2020). Aerosol and Surface Stability of SARS-CoV-2 as Compared with SARS-CoV-1. New England Journal of Medicine, 382(16); 1564-1567
Wang, Z., C. An, X. Chen, K. Lee, B. Zhang, and Q. Feng (2021). Disposable Masks Release Microplastics to the Aqueous Environment with Exacerbation by Natural Weathering. Journal of Hazardous Materials, 417; 126036
Webb, H. K., J. Arnott, R. J. Crawford, and E. P. Ivanova (2012). Plastic Degradation and its Environmental Implications with Special Reference to Poly (Ethylene Terephthalate). Polymers, 5(1); 1–18
Xu, E. G. and Z. J. Ren (2021). Preventing Masks from Becoming the Next Plastic Problem. Frontiers of Environmental Science and Engineering, 15(6); 125–127
Zambrano-Monserrate, M. A., M. A. Ruano, and L. Sanchez-Alcalde (2020). Indirect Effects of COVID-19 on the Environment. Science of the Total Environment, 728; 138813